How to tie laces on shoes beautifully and effectively

Who doesn’t have shoes with laces? Exactly not you, because you are so bored with the usual binding on sneakers or shoes that you are looking for in our article new ideas and techniques how to beautifully tie your shoelaces. You are clearly not one or two of those who are satisfied with one or two standard types of laces, and you know for sure that there are a lot of different ways to tie your shoelaces, which look not only fashionable and stylish, but also worn comfortably.

You’ll find it interesting

We offer you to get acquainted with them and choose the most suitable option for yourself and your type of shoes. In this article you will learn how to gradually lacing shoes, how unusual and original to tie them and what are fashionable options for tying shoelaces.

The easiest and most known ways to tie your shoes

It is unlikely that each of you can easily tie your shoelaces on complex schemes such as “grid” or “hidden knot”; most likely, you use one of the most common ways of lacing, such as “zigzag”, which fits under the shoes, and under the shoes, sneakers, boots, thigh. Lacing is very simple: the laces are tied by crossing with the obligatory hitting all the holes, the ends of the laces are tied with a bow and if necessary hide in the shoes.

“Reverse chain.”

This variant also differs in simplicity of execution, but looks more original than “zigzag” – especially it is loved by girls, perhaps for its resemblance to the oblique ring. This method is not complicated, although in time and more expensive than the “Zigzag”:

Insert the tip of the lanyard into the first hole on the bottom.

Lead it up through all the subsequent holes on one side.

Do the same thing on the other side by guiding the lanyard into the front row loops so that they overlap.

This lacing looks best with a wide lacing of light shades on the contrast with dark shoes, preferably sports shoes like sneakers or sneakers. By the way, if you want to update not only the lacing, but also the shoes themselves, check out the site Pokupon – there you will find a wide range of different types of shoes for every taste at a good price with a cacheback.

Unusual lanyard tying schemes

Non-trivial lacing methods are a great alternative to simple and annoying options; they refresh the look of your shoes, make your image more stylish and original. Do not be afraid if at first sight and once you like the scheme will seem too complicated and incomprehensible. One night of trial and error, and tomorrow you’ll already be wearing shoes with a beautiful new lacing.


From the point of view of fashionable young people this type of lacing looks funny and unusual, in particular, due to the fact that the knot that completes the lacing, you can hide under the tongue of the shoe. Let’s try to lace up the zipper, no matter how difficult it may seem, and this is how we do it:

Pull the lanyard through the bottom holes from the inside, that is, with the ends on top of you.

Put the ends under the stitch.

Cross the laces, pull the ends in the next holes on you and pass under the stitch.

Similarly, repeat step 3 to the tongue of the shoe.

“Tangled trail”

If you’ve coped with lightning, you won’t find it so difficult to confuse the trail. This is one of the most stylish and popular ways, which, according to young people, very fashionable to wear. This option is perfect for long shoelaces: they are rarely comfortable, and many try to shorten them as much as possible, so as not to interfere with walking. Instructions for tying a “tangled footprint” are as follows:

Pull the shoelace through the bottom holes on the inside.

Throw each end crosswise on the opposite side, letting one hole through.

After passing the ends through the holes, lower them from the inside to those holes that are left empty, and pull the cord through them.

Next, knit the ends of the cord again crosswise and pass them from the inside through the previous holes in which we pulled them out one step earlier.

Repeat these steps until the top of the shoe, hide the ends of the lanyard by the tongue.


This type of lacing looks great on sneakers and sneakers with wide laces, and despite the difficulty of tying such a scheme, you will be satisfied with the end result. It is important to remember that this option is suitable only for shoes in which no less than 6 holes, and the laces should preferably be long enough to be enough for such a pattern. To “grid” get flat and beautiful, follow the instructions step by step:

Push the lanyard from the inside into the bottom holes and pull it out from the outside.

Cross the loose ends and pull each of them into a third hole on the bottom on the opposite side, skipping the second hole.

After passing the ends through the holes, lower them from the inside to the holes that are left empty and pull the lanyard through them.

Cross the ends of the laces again and extend them into the holes in the fourth row from below.

Return the ends to the holes in the third row by pulling them from the inside each on its own side.

Pull the ends of the cord out of the holes in the third row and cross them into the holes in the fifth row.

Reverse each tip of the lanyard one hole back as you did in the previous steps.

Repeat these steps until the top of the shoe and tie the ends of the lanyard in a knot.

The lanyard for this type of tying can be a choice of color or colorful, so the lacing will look even more spectacular.

To better understand the scheme of tying the laces “grid”, watch a special video, which clearly demonstrates how to do it:

Hidden knot

This funny and original tie is a great option for those who do not like protruding ends, knots and bows; it looks pretty succinct, hiding everything superfluous. How to achieve this effect?

Insert one end of the tie cord into the hole on the outside of one side and at the same time the other end into the hole on the other side.

Pull the end of the lanyard out of the inside into a hole on the same side, skipping one row.

Repeat this action with both ends of the cord until the cord passes through the holes.

Take both ends to the inside of the shoe, under the tongue, and tie the knot on the side.


This scheme of tying shoelaces is common among those who wear shoes of the army type, it has a high strength, and it is easy to loosen it, which allows you to quickly remove the shoes without the need to fully laced it with minimal time and effort. Lace-up “ladder” shoes are perfect for thighs and high boots. It is relatively easy to tie your shoes in this way. It’s for that:

Run the shoelace through the two bottom holes and pull it out on each side.

Slide one end crosswise through the upper hole to the outside.

Do the same with the second end, and so on, all the way to the top.

How to tie shoe laces with 3, 4, 5, 6, 7 holes

Which type of lacing to choose for a particular type of shoe depends directly on the number of holes intended for laces. Complex beautiful weave is not suitable for shoes with 3-5 holes, and some simple options may look boring on shoes with 6-7 holes or more. However, if you liked a certain type of lacing, and your shoes are not suitable for it by the number of holes, you can always buy a new one for a promotion or with the help of promotional code on Pokupona.

Shoes with 3-4 holes

Not the most common variant of the number of holes: most often so many are in shoes or sneakers. For 3-4 holes will fit lacing “cross” – a classic scheme to tie the laces on sneakers, boots, sneakers and shoes with a small number of holes. Many people have known it since childhood, and therefore should not cause any special difficulties with the execution. How to make such a lacing properly?

We put the shoelace in the two bottom holes.

We twist it crosswise.

We continue to guide the ends of the laces this way through the other holes, moving upwards.

Shoes with five holes

A small number of holes, and even odd – many people think that such a combination inevitably leads to problems in tying shoelaces. However, not everything is so terrible – for shoes with 5 holes there are at least two options. One of them is the so-called straight lacing. It is tied in the same way as a lacing “closed knot”, with the difference that the ends of the laces do not need to be filled. The second scheme – “cross” – is similar to the above mentioned “zigzag” technique, but its key difference is that there is free space between the rows of laces, while the “zigzag” laces without passes. You can start lacing shoes according to this technique both on the outside and on the inside.

Shoes with 6 and 7 holes

Shoes, sneakers, shoes, thighs are often with a number of holes from 6-7, and in this case, there is where to walk the fantasy. For shoes with 6-8 holes will fit any type of lacing, and for shoes with 7 holes, that is, with an odd number of holes will fit the same scheme as for shoes with 5 holes.

One of the most original ways of lacing for shoes with 6 holes is “chessboard” lacing, which only seems very complicated and involves the following steps:

Take two rather wide laces in contrasting colours, for example black and white.

Thread the first lanyard through the holes so that the “hidden knot” scheme comes out.

Slide the second lanyard through the first one vertically so that the colors alternate in a chess order.

For 7 holes is also relevant scheme “for racers”, which allows shoes to sit tight on his leg, the laces do not untie and do not interfere. Follow the following instructions to make you happy with the result:

Take the shoelaces, they should be long enough.

Slide one end of the shoelace from the inside into the bottom left hole, and slide the other diagonally up and into the top right hole.

Lead each end of the cord, one at the top and the other at the bottom to the center with zigzag stitches.

When the ends of the cord meet with each other in the middle, tie them in a knot.

Types of knots

Beautiful lacing cannot be considered complete without a beautiful and durable knot. A good knot decorates shoes, complements the lacing and makes sure that the laces do not untie. Many of us from a young age are used to the standard kind of knot, which tie easily, quickly, but, unfortunately, not always as effective as we would like. In fact, there are several varieties of sturdy, reliable knots that will keep the laces long and steady. After all, sometimes the ends of the laces can simply be tucked in by the tongue.


It’s a standard bow most of us use every day.

“Hare’s ears.”

“Surgeon’s Node”

This knot is difficult to call simple, but it exceeds all expectations in terms of strength. It has a name for a reason – it is vital for the surgeon to complete the suture during the operation in such a way that it does not untie under any circumstances. This is the same with this knot – it holds on well, does not untie, and if you stuff your arm well, it is no longer so difficult to perform.

“Double sliding knot.”

Another knot that will be a decent protection for your feet and shoe lacing. It is not difficult to tie it, and at the same time it is very strong and reliable due to its special design. Try it and see for yourself!